All Books

The “Make Electronics: Learning Through Discovery, 2nd Edition” is a helpful book for the beginners of electronics students. Make Electronics is written by the author Charles Platt. Charles is a Contributing Editor and regular columnist for Make magazine, where he has written about electronics. He was a Senior Writer for Wired magazine and has written numerous computer books. Make Electronics is awesome for anyone starting off in electronics. There is a good amount of experiments to better your understanding of the basics. The pictures of this book are bright and sharp. This is the second edition, and Charles described the things that have been improved from the first edition. This book also has a lot of basic info for accommodating beginners, and a good brush-up course for more advanced people. It tells how to solder, identify resistors, install and use things like IC’s and LEDs without burning them out. Additionally, it tells the basic facts about electronic components, like what IC’s, LEDs, and capacitors are. There is information toward the end on how to program software for your own contraptions using Arduino, versatile and cheap software that is good for programming robots. In short, Make Electronics is a must-read book for all the electronics students.

The “Encyclopedia of Electronic Components Volume 1: Resistors, Capacitors, Inductors, Switches, Encoders, Relays, Transistors 1st Edition” is a must-read book for electronics field student. Charles Platt is the author of this book. Platt is a contributing editor and regular columnist for Make magazine, where he writes about electronics. He writes numerous other networking books and all of them are worth reading. Charles created semi-automated rapid cooling devices with medical applications and air-deployable equipment for first responders. In this book, Charles Platt gives a complete introduction about capacitors, resistors, switches, and transistors, etc. The reader will learn about all these things, how it works and why it’s useful. Encyclopedia of Electronic Components Volume 1 is very helpful for teachers, engineers and for all students who are in the Electronics field. This book is a fairly comprehensive look at just about every passive electronic component out there. It has great detailed descriptions, beautiful photographs and even some basic circuit uses of the components. All in all, the Encyclopedia of Electronic Components Volume 1 is a good electronics book for understanding the how, where, what and whys of electronics components.

The “Easy Electronics (Make: Handbook), 1st Edition” is a great book for beginners as it reveals the basics of electronics. Easy Electronics is written by the author Charles Platt. Charles is a contributing editor and regular columnist for Make: magazine, where he writes about electronics and tools. Easy Electronics is a must-read book for anyone who feels hesitant and does not perform experiments inaccurate way. This book will take the reader step by step through 12 basic projects. With the help of these 12 experiments, the reader will learn all about resistors, switches, capacitors, transistors, audio transducers, silicon chip and much more. Before starting this book, there is no prior knowledge is required and no math is involved. Furthermore, you will learn how to read schematics by comparing them with the circuit that you build. The author uses a few chapters on a quick refresher on those topics and then he moves on. Each topic is covered clearly and concisely and packed with the details that you learn to be truly effective. He provides step by step instructions on simple projects with progression and a good explanation of concepts and actions with the cause and effect of each different design. Easy Electronics engages all the newbies and professionals from start to end of the page. In summary, Easy Electronics is a perfect book for newbies and professionals who want to know more about Electronics.

The “Encyclopedia of Electronic Components Volume 2: LEDs, LCDs, Audio, Thyristors, Digital Logic, and Amplification 1st Edition” is a very well written book with lots of practical information about Electronics. Charles Platt and Fredrik Jansson are the authors of this book. This series of books “Encyclopedia of Electronic Components” would strongly benefit from expanding the number of images representing the various makes and types of component examples, per given category. Click on the button given below to download PDF Encyclopedia of Electronic Components Volume 2: LEDs, LCDs, Audio, Thyristors, Digital Logic, and Amplification 1st Edition. You can also Download Make: Getting Started with 3D Printing by Liza Wallach Kloski PDF.

The “Make: Electronics: Learning Through Discovery 2nd Edition” is a fantastic resource for learning about and teaching electronics basics. Charles Platt is the author of this classic book. The writing is detailed and interesting with background information to add interest, and the production of the book is fabulous. Each page looks great and looks of color. The author explains things in an easy to understand manner with plenty of diagrams and drawings to aid in the understanding. Charles Platt is the author of this book. This book is a great introduction to electronics. For us, it provides the right amount of hands-on circuit building work together with easy to understand explanations of why a circuit is being constructed in the way presented. The supporting diagrams are extremely helpful, providing a diagram showing a drawing of the components on the breadboard along with the corresponding schematic is a very good learning aid.